As an Amazon Associate I earn from qualifying purchases.
Fc board add the popular and reliable USB Type-C instead of Micro USB which makes connection easily. F7 fc included a connector specifically for DJI air unit, so installation should be a breeze.







Note? if you use your own d ji remote controller, you must update your firmware betaflight_4.


1. iFlight
#ad
IFlight SucceX-D F7 TwinG Dual ICM20689 Flight Controller F7 FC Built-in OSD BEC Current Sensor Black Box for DJI FPV Air Unit HD Version…
#adiFlight #ad - Built-in osd, double 5v/2. 5a, 9v/2. 5a bec, high-performance hardware, optimized circuit design, further guarantees powerful performance of flight controller.Fc board add the popular and reliable USB Type-C instead of Micro USB which makes connection easily. F7 fc included a connector specifically for DJI air unit, so installation should be a breeze.
More information #ad
This flight controller is ready for anything with 5 uarts, 8 motor outputs, Dual ICM20689 gyro, 32mb blackbox and a powerful F7 processor to run it all. The f7 flight controller hd version is designed to work seamlessly for DJI’s new HD FPV system.Brand | iFlight #ad |
Manufacturer | iFlight #ad |
Weight | 0.06 Pounds |
Part Number | SucceX-D |
More information #ad
2. iFlight
#ad
IFlight SucceX-E Mini F7 V1.0 MPU6000 Flight Controller 20x20mm F7 FC Built-in OSD LC Filter 8MB Black Box Support Vista HD for FPV Racing Drone Quadcopter
#adiFlight #ad - 5. Built with bat, +5v, 3. 3v, start indicator light, it will indicate the current working status. 1. Succex-e mini f7 v1. 0 flight controller support Vista HD VTX plug directly. 3. Succex-e mini f7 v1. 0 fc support analog vtx and analog camera directly plug, no need solder.More information #ad
4. This new f7 flight controller built with LC filter, this LC filter reduces DC-DC switcher supply ripple and helps clean noisy power from a battery. 2. This f7 v1. 0 support all receiver such as frsky receiver, tbs receiverdirectly plug to it, no need to solder.Brand | iFlight #ad |
Manufacturer | iFlight #ad |
Part Number | 0 |
Model | 0 |
More information #ad
3. iFlight
#ad
IFlight SucceX-E F7 Flight Controller 30.5X 30.5mm Mounting F7 FC, 16MB Black Box, for 3-6s FPV Racing Drone Quadcopter, Built-in OSD
#adiFlight #ad - Succex-e f7 fc support analog vtx and analog camera directly plug, no need solder. Built with bat, start indicator light, 3. 3v, +5v, it will indicate the current working status.More information #ad
Succex-e f7 fc support Vista HD VTX plug directly. Mounting holes: 305*305mm/Φ4mm. Different colors on the front and back, using two-color printing process, different visual experience than ever.Brand | iFlight #ad |
Manufacturer | iFlight #ad |
Part Number | 0 |
Model | 0 |
More information #ad
4. iFlight
#ad
IFlight SucceX-E F7 V1.0 45A BLHeli_S 2-6S Flight Stack MPU6000 30.5X 30.5mm Mounting for FPV Racing Drone Quadcopter
#adiFlight #ad - Built with lc filter, this lc filter reduces DC-DC switcher supply ripple and helps clean noisy power from a battery. Succex-e f7 fc v1. 0 45a stack support vista HD system plug and play.More information #ad
Support all receiver such as frsky receiver, tbs receiverdirectly plug to it, no need to solder. Smartaudio & irc Tramp VTX protocol supported. Built with bat, start indicator light, 3. 3v, +5v, it will indicate the current working status.Brand | iFlight #ad |
Manufacturer | iFlight #ad |
Part Number | SucceX-E F7 with 45A |
More information #ad
5. iFlight
#ad
IFlight SucceX-E 45A V2 2-6s BLHeli_S +iFlight SucceX-E F7 Flight Controller 30.5X 30.5mm Mounting
#adiFlight #ad - Succex-e f7 fc support analog vtx and analog camera directly plug, no need solder. Succex-e f7 fc support Vista HD VTX plug directly. Built with bat, 3. 3v, start indicator light, +5V, it will indicate the current working status.More information #ad
Brand | iFlight #ad |
More information #ad
6. iFlight
#ad
IFlight SucceX-D Mini F7 TwinG Stack Mini F7 TwinG FC with SucceX 45A BLHeli_32 4-in-1 ESC Compatible for DJI Air Unit
#adiFlight #ad - Package included? -succex-d mini f7 twing fc x 1 -succex 45a blheli_32 4-in-1 esc x 1 - compatible harness cable x 1 -Stack mounting screws and dumpers and nuts, cable NOTE:The stack is not included Air Unit compatible for DJI.More information #ad
Universal usb type C connector instead of micro USB. No need to solder tiny wires. Supports blheli pass-through for easy ESC upgrade and configuration. Plug-and-play. Designed to support Digital FPV compatible for DJI.Brand | iFlight #ad |
Manufacturer | iFlight #ad |
Part Number | M32741 |
More information #ad
7. iFlight
#ad
IFlight SucceX-E Mini F7 Flight Controller + SucceX Mini 45A BLHeli_32 4in1 ESC
#adiFlight #ad - Succex mini 45a blheli_32 4in1 esc, 48mhz runs blheli 32. X firmware, onboard current sensor. 6 layers single-board stacking PCB board, 4x STM32G071 MCU processers.More information #ad
Succex-e mini f7 v1. 0 flight controller support Vista HD VTX plug directly. This new f7 flight controller built with LC filter, this LC filter reduces DC-DC switcher supply ripple and helps clean noisy power from a battery.Brand | iFlight #ad |
More information #ad
8. iFlight
#ad
IFlight SucceX-D F7 TwinG Stack Flight Control with SucceX 50A or 60A 2-6S 4 in 1 ESC for Air Unit HD FPV System F7 TwinG FC + 50A ESC
#adiFlight #ad - No need to solder tiny wires. Model 1 setup?reveiver tap -> choose ?spektrum / jr taer1234? model 2 setup?Reveiver tap -> Choose ?Frsky / Graupner / Futaba / Hitec AETR1234? In additionally, we have included a connector specifically for DJI air unit, we add the popular and reliable USB Type-C instead of Micro USB which makes connection easily.Note? if you use your own d ji remote controller, you must update your firmware betaflight_4.
More information #ad
1. 0_stm32f7x2 configuratorbetaflight to 106. 0 to set up and bind your D JI remote controller. The succex-d f7 is designed to work seamlessly with new hd fpv system. To make things as simple as possible, so installation should be a breeze. Supports blheli pass-through for easy ESC upgrade and configuration. Designed to support Digital FPV. Universal usb type c connector instead of micro USB Plug-and-Play.Brand | iFlight #ad |
Manufacturer | iFlight #ad |
Part Number | M32738-M32740 |
More information #ad
9. iFlight
#ad
IFlight SucceX-E Mini F7 V1.0 MPU6000 Flight Controller 20x20mm F7 FC+ iFlight SucceX Mini 55A BLHeli_32 4in1 ESC 2-6S
#adiFlight #ad - 55a esc with standard 20*20 Φ4mm mounting holes, rational layout, countersunk holes on extended power soldering pad enable each layer board can be powered. 1. Succex-e mini f7 v1. 0 flight controller support Vista HD VTX plug directly.More information #ad
2. Succex-e mini f7 v1. 0 fc support analog vtx and analog camera directly plug, no need solder. 55a esc adopt 6 layers double-sided PCB board. 3. Iflight succex mini 55a blheli_32 4in1 esc was designed to give your motors smooth power with great stability and durability, super light weight only 7. 6g. 4. 5.Brand | iFlight #ad |
More information #ad
10. iFlight
#ad
IFlight SucceX-E Mini F7 Flight Controller+ iFlight SucceX-E Mini 35A BLHeli_S ESC
#adiFlight #ad - 3. Succex-e mini f7 v1. 0 fc support analog vtx and analog camera directly plug, no need solder. 4. Succex-e 35a blheli_s dshot600 4in1 esc based on succeX ESC, was designed to give your motors smooth power with great stability and durability, more affordable.More information #ad
1. Succex-e mini f7 v1. 0 flight controller support Vista HD VTX plug directly. 5. Standard 20*20mm/Φ3mm mounting holes; Vibration and shocks can be perfectly avoided by adding dampers. 2. This f7 v1. 0 support all receiver such as frsky receiver, tbs receiverdirectly plug to it, no need to solder.Brand | iFlight #ad |
More information #ad