TEMCo WC0323-10 ft 4/0 Gauge AWG Welding Lead & Car Battery Cable Copper Wire RED | MADE IN USA

TEMCo - 30 bare copper conductor insulated with high grade EPDM. 440 max amps up to 50 feet, rated up to 600 volts, -50°C to +105°C -58°F to +221°F. Temco easy-flex has a rugged epdM jacket and is highly flexible. Rohs Compliant. Minimum temperature rating -50°C. A paper separator is utilized to enchange stripability.

Annealed 30 gauge bare copper conductor. Nominal od: 0686", conductor stranding: 1950/30 Highly flexible stranded No. Example, if a 10 ft length and a 25 ft length are bought, then you would receive 35 ft on one but cut into the lengths that are bought. Resistant to cuts, water, oil, Tears, Abrasion, Grease and Flame.

TEMCo WC0323-10 ft 4/0 Gauge AWG Welding Lead & Car Battery Cable Copper Wire RED | MADE IN USA - Nec article 630 electric welders, meets sae J1127 and ASTM B-172 standards. In addition to welding applications, rv & golf cart wiring, battery banks and any other use that requires rugged, welding cable can also be used in car audio & battery installations, solar & inverter wiring, highly flexible cable.

Note: if more than 1 length of wire is bought, 99% of the time it will be shipped on the same roll. Maximum conductor operating temperature is 105°C in circuits not exceeding 600 volts.

More information about TEMCo

SELTERM 2 Pack 4/0 Gauge 4/0 AWG 3/8" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets

SELTERM - Ul tested & Approved. Close end pad seals Out Moisture Keeping Cables Dry. Corrosion free Ideal for Marine Automotive or Outdoor Use. Selterm marine grade copper Lugs are manufactured using industry leading processes to guarantee a high-quality product. To ensure corrosion resistance the tin-plated lugs are salt spray tested to ASTM B 117.

SELTERM 2 Pack 4/0 Gauge 4/0 AWG 3/8" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets - Made from 100% annealed Tinned Copper for Max Current Flow. The battery Cable lugs meet S. A. E conductivity standards and are tested to UL 486 with voltage rating of up to 600 V. Can be Crimped or Soldered.

More information about SELTERM


Similar products



TEMCo WC0308-20 ft 4/0 Gauge AWG Welding Lead & Car Battery Cable Copper Wire BLACK | MADE IN USA

TEMCo - Close end pad seals Out Moisture Keeping Cables Dry. Minimum temperature rating -50°C. Maximum conductor operating temperature is 105°C in circuits not exceeding 600 volts. Temco easy-flex has a rugged epdM jacket and is highly flexible. Corrosion free Ideal for Marine Automotive or Outdoor Use. Rohs Compliant.

Highly flexible stranded No. Made from 100% annealed Tinned Copper for Max Current Flow. 440 max amps up to 50 feet, rated up to 600 volts, -50°C to +105°C -58°F to +221°F. Annealed 30 gauge bare copper conductor. Nominal od: 0686", conductor stranding: 1950/3030 bare copper conductor insulated with high grade EPDM.

TEMCo WC0308-20 ft 4/0 Gauge AWG Welding Lead & Car Battery Cable Copper Wire BLACK | MADE IN USA - Can be Crimped or Soldered. Example, if a 10 ft length and a 25 ft length are bought, then you would receive 35 ft on one but cut into the lengths that are bought. Resistant to cuts, oil, Tears, Water, abrasion, Grease and Flame. Nec article 630 electric welders, meets sae J1127 and ASTM B-172 standards. A paper separator is utilized to enchange stripability.

More information about TEMCo


Similar products



Temco 10 Lot 4/0 AWG 5/16" Hole Ring Terminal Lug Tinned Copper Uninsulated Gauge

TEMCo - Most orders received in 2 to 5 days. If you don't like it, we'll take it back & pay the shipping! Our return policy. Note: audio wire may not be direct fit. Rohs Compliant. All weather rated. When paired with tEMCo adhesive heat shrink will prevent corrosion by sealing out moisture. High electrolytic Grade Copper Terminals outlast and outperform others.

Precision fit. Resistant to cuts, tears, abrasion, Water, Oil, Grease and Flame. Nec article 630 electric welders, meets sae J1127 and ASTM B-172 standards. Ul tested & Approved. Works on solid or stranded wire. Temco easy-flex has a rugged epdM jacket and is highly flexible. Ships from Stock. Lifetime warranty. Flared opening for easy wire insertion.

Temco 10 Lot 4/0 AWG 5/16" Hole Ring Terminal Lug Tinned Copper Uninsulated Gauge - Closed end construction. Corrosion free Ideal for Marine Automotive or Outdoor Use. Recommend to use a size or two larger terminal than the gauge of the audio wire. Annealed 30 gauge bare copper conductor.

More information about TEMCo


Similar products



TEMCo 1" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft Black

TEMCo ST0320 - Annealed 30 gauge bare copper conductor. Nominal od: 0686", conductor stranding: 1950/30 Temco industrial adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction. The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner.

High-tolerance dies are used in the molding process. Made from 100% annealed Tinned Copper for Max Current Flow. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate.

TEMCo 1" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft Black - . 1 year warranty. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Temco easy-flex has a rugged epdM jacket and is highly flexible. Corrosion free Ideal for Marine Automotive or Outdoor Use. Resistant to salt water, Gasoline, Oil, Diesel Fuel, and more. Ideal for marine, Automotive or Outdoor applications.

More information about TEMCo ST0320


Similar products



TEMCo 3/4" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft Black

TEMCo ST0310 - The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Recommend to use a size or two larger terminal than the gauge of the audio wire. Diameter: 1". Flared opening for easy wire insertion. Closed end construction. Color: black, material: Polyethylene, Shrink Ratio: 3:1. Ul tested & Approved.

When paired with tEMCo adhesive heat shrink will prevent corrosion by sealing out moisture. High electrolytic Grade Copper Terminals outlast and outperform others. Precision fit. Corrosion free Ideal for Marine Automotive or Outdoor Use. Can be Crimped or Soldered. 1 year warranty. Resistant to salt water, Oil, Diesel Fuel, Gasoline, and more.

TEMCo 3/4" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft Black - Works on solid or stranded wire. Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. Made from 100% annealed Tinned Copper for Max Current Flow. Color: black, material: Polyethylene, Shrink Ratio: 3:1. 440 max amps up to 50 feet, rated up to 600 volts, -50°C to +105°C -58°F to +221°F. Resistant to cuts, water, Oil, abrasion, Tears, Grease and Flame.

More information about TEMCo ST0310


Similar products



TEMCo 3/4" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft RED

TEMCo ST0430 - Ul tested & Approved. Note: audio wire may not be direct fit. Works on solid or stranded wire. Recommend to use a size or two larger terminal than the gauge of the audio wire. Diameter: 1". Resistant to salt water, Diesel Fuel, Oil, Gasoline, and more. Diameter: 3/4". Resistant to salt water, Diesel Fuel, Oil, Gasoline, and more.

Diameter: 3/4". Made from 100% annealed Tinned Copper for Max Current Flow. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. When paired with tEMCo adhesive heat shrink will prevent corrosion by sealing out moisture. 1 year warranty. Upon cooling, non-drying, the adhesive solidifies, forming a permanent, flexible and water resistant barrier.

TEMCo 3/4" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft RED - Resistant to salt water, Gasoline, Diesel Fuel, Oil, and more. Close end pad seals Out Moisture Keeping Cables Dry. Resistant to cuts, tears, Water, abrasion, Oil, Grease and Flame. Nec article 630 electric welders, meets sae J1127 and ASTM B-172 standards. Color: black, material: Polyethylene, Shrink Ratio: 3:1.

When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate.

More information about TEMCo ST0430


Similar products