TEMCo WC0305-5 ft 4/0 Gauge AWG Welding Lead & Car Battery Cable Copper Wire BLACK | MADE IN USA

TEMCo - 440 max amps up to 50 feet, rated up to 600 volts, -50°C to +105°C -58°F to +221°F. Highly flexible stranded No. Maximum conductor operating temperature is 105°C in circuits not exceeding 600 volts. Example, if a 10 ft length and a 25 ft length are bought, then you would receive 35 ft on one but cut into the lengths that are bought.

Temco easy-flex has a rugged epdM jacket and is highly flexible. In addition to welding applications, welding cable can also be used in car audio & battery installations, solar & inverter wiring, battery banks and any other use that requires rugged, RV & golf cart wiring, highly flexible cable. Note: if more than 1 length of wire is bought, 99% of the time it will be shipped on the same roll.

TEMCo WC0305-5 ft 4/0 Gauge AWG Welding Lead & Car Battery Cable Copper Wire BLACK | MADE IN USA - Rohs Compliant. Annealed 30 gauge bare copper conductor. Nominal od: 0686", conductor stranding: 1950/30 Minimum temperature rating -50°C. Resistant to cuts, water, Oil, Abrasion, Tears, Grease and Flame. Nec article 630 electric welders, meets sae J1127 and ASTM B-172 standards. 30 bare copper conductor insulated with high grade EPDM.

A paper separator is utilized to enchange stripability.

More information about TEMCo

SELTERM 5 Pack 4/0 Gauge 4/0 AWG 5/16" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug

SELTERM - Heavy duty battery cable lugs from SELTERM are manufactured using industry leading manufacturing processes to guarantee a high-quality product. Close end pad seals Out Moisture Keeping Cables Dry. Ul tested & Approved. The copper eyelet connectors are rated for up to 600 volts and tested to ANSI/UL 486 standard.

Copper tubing used for producing the battery cable lugs meet ASTM B 188 electrical grade standard. Can be Crimped or Soldered. Lugs are suitable for use with Welding Cables and Battery Cables. Heavy duty construction for Enhanced High Temperature Durability. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity.

SELTERM 5 Pack 4/0 Gauge 4/0 AWG 5/16" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug - Furthermore, the copper battery lugs are both UL and CUL listed to ensure optimal performance once installed. The copper lugs also meet S. A. E conductivity standards and are RoHS compliant.

More information about SELTERM


Similar products



TEMCo WC0322-5 ft 4/0 Gauge AWG Welding Lead & Car Battery Cable Copper Wire RED | MADE IN USA

TEMCo - Temco easy-flex has a rugged epdM jacket and is highly flexible. A paper separator is utilized to enchange stripability. Heavy duty construction for Enhanced High Temperature Durability. 30 bare copper conductor insulated with high grade EPDM. Close end pad seals Out Moisture Keeping Cables Dry. Resistant to cuts, tears, Abrasion, Oil, water, Grease and Flame.

Nec article 630 electric welders, meets sae J1127 and ASTM B-172 standards. Annealed 30 gauge bare copper conductor. Nominal od: 0686", conductor stranding: 1950/30 Example, if a 10 ft length and a 25 ft length are bought, then you would receive 35 ft on one but cut into the lengths that are bought. In addition to welding applications, rv & golf cart wiring, solar & inverter wiring, battery banks and any other use that requires rugged, welding cable can also be used in car audio & battery installations, highly flexible cable.

TEMCo WC0322-5 ft 4/0 Gauge AWG Welding Lead & Car Battery Cable Copper Wire RED | MADE IN USA - Note: if more than 1 length of wire is bought, 99% of the time it will be shipped on the same roll. Highly flexible stranded No. 440 max amps up to 50 feet, rated up to 600 volts, -50°C to +105°C -58°F to +221°F. Ul tested & Approved. Minimum temperature rating -50°C.

More information about TEMCo


Similar products



TEMCo 3/4" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft Black

TEMCo - Heavy duty construction for Enhanced High Temperature Durability. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Resistant to cuts, abrasion, water, Oil, Tears, Grease and Flame. Nec article 630 electric welders, meets sae J1127 and ASTM B-172 standards. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C.

Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Upon cooling, the adhesive solidifies, non-drying, forming a permanent, flexible and water resistant barrier. Annealed 30 gauge bare copper conductor. Nominal od: 0686", conductor stranding: 1950/30 Resistant to salt water, Gasoline, Oil, Diesel Fuel, and more.

TEMCo 3/4" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft Black - 440 max amps up to 50 feet, rated up to 600 volts, -50°C to +105°C -58°F to +221°F. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive. Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. Temco easy-flex has a rugged epdM jacket and is highly flexible.

. The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner.

More information about TEMCo


Similar products



SELTERM 5 Pack 4/0 Gauge 4/0 AWG 5/16" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets

SELTERM - Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Temco easy-flex has a rugged epdM jacket and is highly flexible. To ensure corrosion resistance the tin-plated lugs are salt spray tested to ASTM B 117. Ul tested & Approved. Ul tested & Approved. Annealed 30 gauge bare copper conductor. Nominal od: 0

686", conductor stranding: 1950/301 year warranty. Resistant to cuts, water, Tears, Abrasion, Oil, Grease and Flame. Nec article 630 electric welders, meets sae J1127 and ASTM B-172 standards. Color: black, material: Polyethylene, Shrink Ratio: 3:1. Selterm marine grade copper Lugs are manufactured using industry leading processes to guarantee a high-quality product.

SELTERM 5 Pack 4/0 Gauge 4/0 AWG 5/16" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets - Close end pad seals Out Moisture Keeping Cables Dry. Close end pad seals Out Moisture Keeping Cables Dry. Heavy duty construction for Enhanced High Temperature Durability. Corrosion free Ideal for Marine Automotive or Outdoor Use. The battery Cable lugs meet S. A.

More information about SELTERM


Similar products