TEMCo WC0217-10 ft 1 Gauge AWG Welding Lead & Car Battery Cable Copper Wire BLACK | MADE IN USA

TEMCo - 30 bare copper conductor insulated with high grade EPDM. Resistant to cuts, water, tears, Abrasion, Oil, Grease and Flame. Nec article 630 electric welders, meets sae J1127 and ASTM B-172 standards. Temco easy-flex has a rugged epdM jacket and is highly flexible. Annealed 30 gauge bare copper conductor. Nominal od: 0

481", conductor stranding: 767/30 In addition to welding applications, rv & golf cart wiring, solar & inverter wiring, battery banks and any other use that requires rugged, TEMCo Easy-Flex welding cable can also be used in car audio & battery installations, highly flexible cable. Note: if more than 1 length of wire is bought, 99% of the time it will be shipped on the same roll.

TEMCo WC0217-10 ft 1 Gauge AWG Welding Lead & Car Battery Cable Copper Wire BLACK | MADE IN USA - 240 max amps up to 50 feet, rated up to 600 volts, -50°C to +105°C -58°F to +221°F. A paper separator is utilized to enchange stripability. Example, if a 10 ft length and a 25 ft length are bought, then you would receive 35 ft on one but cut into the lengths that are bought. Minimum temperature rating -50°C.

Maximum conductor operating temperature is 105°C in circuits not exceeding 600 volts. Highly flexible stranded No. Rohs Compliant.

More information about TEMCo

SELTERM UL Listed Heavy Duty Wire Lugs Battery Cable Ends Bare Copper Eyelets Tubular Ring Terminal Connectors

SELTERM - Close end pad seals Out Moisture Keeping Cables Dry. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. The copper eyelet connectors are rated for up to 600 volts and tested to ANSI/UL 486 standard. Can be Crimped or Soldered. Furthermore, the copper battery lugs are both UL and CUL listed to ensure optimal performance once installed.

Lugs are suitable for use with Welding Cables and Battery Cables. Heavy duty battery cable lugs from SELTERM are manufactured using industry leading manufacturing processes to guarantee a high-quality product. The copper lugs also meet S. A. E conductivity standards and are RoHS compliant. Ul tested & Approved.

SELTERM UL Listed Heavy Duty Wire Lugs Battery Cable Ends Bare Copper Eyelets Tubular Ring Terminal Connectors - Copper tubing used for producing the battery cable lugs meet ASTM B 188 electrical grade standard. Heavy duty construction for Enhanced High Temperature Durability.

More information about SELTERM


Similar products



TEMCo Hammer Lug Crimper Tool 5 Year Warranty

Temco TH0007 - Place stripped wire in terminal. Step 3 when hammer impact feels solid, the crimp is complete. Note: some crimpers come with a gauge, but with variations in wire, terminal wall thickness and material used, this feature is a recipe for bad crimps. Once the terminal completely envelopes the wire, the crimper will not move and when struck will feel "solid".

Heavy duty construction for Enhanced High Temperature Durability. Step 2 with crimper on solid surface, strike crimp ram with hammer 1-2 times. Close end pad seals Out Moisture Keeping Cables Dry. Can be Crimped or Soldered. Using the force method above will guarantee perfect crimps every time. Ul tested & Approved.

TEMCo Hammer Lug Crimper Tool 5 Year Warranty - Manual hammer crimper recommend 2 to 4 lb sledgehammer. Also works well in a shop vise. Crimping type: Indent. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Terminal Type: Uninsulated. Wire gauge 8 awg, 6 awg, 2 awg, 1 awg, 0 awg, 00 awg, 000 awg, 4 awg, 0000 AWG. Ideal for battery And Welding Cables.

More information about Temco TH0007


Similar products