Spartan Power 1/0 AWG 0 Gauge Battery Cable Set – Made in the USA, Lifetime Crimp Warranty – Many Lengths 1 ft 5/16″

Each heavy duty cable is professionally cut, crimped and heat shrunk with the utmost quality & precision by skilled craftsman in Reno, NV who take pride in their work. Vw-1 & moisture resistant, Polyvinylchloride PVC insulation. Perfect for use with a spartan power 150a or 200a fuse kit asin b06y4c6dqr or b06xw27wmd.

Use the battery cables that people rely on every day! spartan power 1/0 1 foot battery cable sets come professionally assembled with 5/16" or 3/8" ring terminals and are perfect for connecting up to a 3500 watt power inverter to a battery bank! You can also use Spartan Power battery cables for replacement automotive, & other vehicle wiring applications, RV, motorcycle, grounding cables, car audio stereo amplifiers, golf cart wiring, solar and many other applications where pure copper is recommended.

Don't get burned by cheap cables and components. These cable sets come with adhesive Lined Irradiated Polyolefin PO heat shrink, which is exceptionally resistant to water, fungus, and UV light. Buy quality, Buy American! Ul 1232/1284/1338 600v or 10269 1000v approved. Cable features:made in the usapolyvinyl-chloride pvc insulation90°c mtw - ul & csa 105°cvoltage rating: 600 voltsvw-1 & moisture resistantROHS CompliantUL 1232/1284/1338/10269 ApprovedHeat Shrink Features:Shrink ratio: Approximately 3 to 1 at +90°C Operational temp.

Range: -55°c to +135°c dielectric strength: 500 v/mil 197 kv/cm volume resistivity: 1014 ohm-cm tensile strength: 1500 psi 141 kg/cm2 specifications: ams-dtl-23053/5, oft new to amazon! made in the usa - lifetime crimp warranty! we believe these are the best 1/0 AWG battery cables on the market today, CL 1 and CL 3; UL 224, if you ever experience a crimp failure, VW-1; CSA 198, Spartan Power will gladly repair your cables for free!.

Spartan power also has 4/0 awg asin b071kqfq3m and 4 awg ASIN B06XFPK2J7 Battery Cables available.

---

BEP 701 Battery Switches - On-Off

Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. The continuous and intermittent ratings are tested at 110% of specified ratings. This ensures that the switch meets ABYC requirements. This control knob also features an interchangeable labeling system allowing a full range of applications Item # 713 or 715.

The rear cover insulating the rear terminals against any short circuits. The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C 212 deg F above the ambient temperature. Control knob can be removed by switching to counter-clockwise 45° position.

All bep switches are tested Independently to this specification by a 3rd party laboratory. Bep marine battery switch test procedures UL 1107 Continuous 1 hour, intermittent 5 minutes and Cranking engine starting - 10 seconds. This switch offers a number of unique features, allowing it to be a stand alone unit, the highlight being the patented Contour Locking System, or locked together with other switches.

Operation: on/off, 1250a dc cranking 10 sec, voltage: 48v dc, rating: 275a dc continuous 1hr, 455a dc intermittent 5 min, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. Three removable side plates provide access of up to 1/0 cables.




Similar products

---

Blue Sea Systems Common 150A BusBar with Four Terminal of 20 1/4-Inch Studs with Cover

The industry standard busbar for positive or negative power distribution Bus material - Tin platted Copper CDA 110/UnS C1100 Insert molded stainless steel studs eliminate need for securing nut and allow high torqueing electrical contact. Max voltage: 300v aC/ 48V DC. Tin-plated copper studs and nuts. 2 mounting holes accept #10 M5 screws.

. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. 150a common busbar with 4 studs and a cover. This ensures the switch meets ABYC requirements. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity.

Continuous rating: 130A AC/ 150A DC. Operation: on/off, voltage: 48v dc, 455a dc intermittent 5 min, rating: 275a dc continuous 1hr, 1250A DC Cranking 10 sec, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. Ignition protected.

Control knob can be removed by switching to counter-clockwise 45° position.


Similar products

---

Renogy TOOL-MC4 Solar Panel Mc4 ASSEMBLY Tool,

Operation: on/off, 1250a dc cranking 10 sec, 455a dc intermittent 5 min, rating: 275a dc continuous 1hr, Voltage: 48V DC, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. For breaking connections after they have already been locked together.

Max voltage: 300v aC/ 48V DC. Hard plastic. Ignition protected. 2 mounting holes accept #10 M5 screws. Continuous rating: 130A AC/ 150A DC. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. Tin-plated copper studs and nuts. This ensures the switch meets ABYC requirements.

The mc4 assembly tool is a hard plastic material that is very handy for both the assembly of custom MC4 wires, making it easier for new and veteran users to quickly and easily tighten and take apart the connectors. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits.

150a common busbar with 4 studs and a cover. Control knob can be removed by switching to counter-clockwise 45° position. Very handy for the assembly of custom Mc4 wires.


Similar products

---

50' solar cable Bulk Black copper #10 AWG 1000 volt PV Wire with Tough XLPE insulation

Continuous rating: 130A AC/ 150A DC. Very handy for the assembly of custom Mc4 wires. 2 mounting holes accept #10 M5 screws. Solar panel wire extender. 150a common busbar with 4 studs and a cover. Ignition protected. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. High quality PV type Cable.

For breaking connections after they have already been locked together. This ensures the switch meets ABYC requirements. Control knob can be removed by switching to counter-clockwise 45° position. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits.

10 awg copper wire with Tough XLPE insulation. Made in USA !1000 vdc solar panel wire extension. Max voltage: 300v aC/ 48V DC. Hard plastic. Tin-plated copper studs and nuts. 50' bulk pv cable black copper #10 1000 vdc solar cable with xlpe insulation high quality cable operation: on/off, 1250A DC Cranking 10 sec, Voltage: 48V DC, 455a dc intermittent 5 min, rating: 275a dc continuous 1hr, Stud Size: 2x3/8" 10mm.




Similar products

---

bayite DC 6.5-100V 0-100A LCD Display Digital Current Voltage Power Energy Meter Multimeter Ammeter Voltmeter with 100A Current Shunt

Main specifications: Working voltage: DC 6. 5 ~ 100v measuring accuracy: 1% Power Consumption: 02w measurement speed: 2 times/s Store Energy data when power off. Made in USA !3. 150a common busbar with 4 studs and a cover. Solar panel wire extender. Packing including: 1x DC 6. 5-100v 100a power multimeter operation: on/off, 455a dc intermittent 5 min, 1250a dc Cranking 10 sec, rating: 275a dc continuous 1hr, Voltage: 48V DC, Stud Size: 2x3/8" 10mm.

Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. Can be reset to 0 This ensures the switch meets ABYC requirements. 2 mounting holes accept #10 M5 screws. High quality PV type Cable. 2. Large-screen lcd display voltage, active power, current, energy at the same time.

Note: only display and shunt are included. Store energy data when power offcan be reset to 0 Very handy for the assembly of custom Mc4 wires. Continuous rating: 130A AC/ 150A DC.


Similar products

---

Vmaxtanks Vmaxslr125 AGM Deep Cycle 12v 125ah SLA rechargeable Battery for Use with Pv Solar Panels,Smart chargers wind Turbine and Inverters

Charging voltage: 14. 7v recommended: 12A, 14. 5v charger: smart/microprocessor controlled charger bci group code: 31 operation: on/off, rating: 275a dc continuous 1hr, 455a dc intermittent 5 min, 1250A DC Cranking 10 sec, Voltage: 48V DC, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches.

For breaking connections after they have already been locked together. Volts 12v amp hours 125ah weight 75lb size : L=12. 9" w=6. 8" h=8. 7" max. You can waive the signature Confirmation by sending us a message with your request when placing your order. With overload alarm functionIf active power is larger than threshold, backlight and power will flash.

12 volt 125ah group 31 agm deep Cycle Heavy Duty Battery. Vmax batteries come with vMAX labels and a VMAX hot stamp on top of battery. Continuous rating: 130A AC/ 150A DC. Please visit faq tab at the vmaxtanks website for service, charging and storage instructions. Military grade custom made plates. Max voltage: 300v aC/ 48V DC.




Similar products

---

2 Sets of RENOGY Branch Connectors Solar MC4 Connectors Y connector in Pair MMF+FFM, Pack of 2

High quality PV type Cable. Float service life span of 8 to 10 years. Please call us 909-517-3598 and extension sales. Description renogy MC4 Branch Connectors are used for parallel connection between solar panels. Very handy for the assembly of custom Mc4 wires. Made in USA ! This ensures the switch meets ABYC requirements.

Military grade custom made plates. Specifications withstanding voltage: 1000v dctuv, 600vul contact resistance: 1m protection Class: Class II Temperature: -40°F to +194°F Protection Degree: IP67, mated Unmating Force:147. 51ft·lb insulation material: pc/pa contact material: copper, including racking, silver plated Flame Class: UL94-V0 or UL94-5VA Warranty Information 1-year material warranty We sell entire home/business solar system both on grid and off grid, inverters and other system components.

150a common busbar with 4 studs and a cover. Sold as a pair, these "y-Connectors" will maintain the voltage of your panel configuration to match your battery size. Large-screen lcd display voltage, current, active power, energy at the same time. Note: only display and shunt are included. One ffm; one mmf withstanding voltage: 1000V DCTUV, 600VUL.

Operation: on/off, 1250a dc cranking 10 sec, rating: 275a dc continuous 1hr, Voltage: 48V DC, 455a dc intermittent 5 min, Stud Size: 2x3/8" 10mm.


Similar products

---

Sun YOBA 5 Pairs of MC4 Male/ Female Solar Panel Cable Connectors

2 mounting holes accept #10 M5 screws. Orders of 5 or more batteries shipped on a pallet must be signed for when delivered. 1000 vdc solar panel wire extension. Test voltage: 6000V 50Hz, 1min. Rated current: 25A 2. 5-4. 0mm2. Voltage test range: dc 6. 5~100v; current test range: 0~100A. It doesn't include any wire or accessories.

The blue backlight can be turned on/off manually. High quality PV type Cable. Control knob can be removed by switching to counter-clockwise 45° position. One ffm; one mmf withstanding voltage: 1000V DCTUV, 600VUL. With overload alarm functionIf active power is larger than threshold, backlight and power will flash.

12 volt 125ah group 31 agm deep Cycle Heavy Duty Battery. Large-screen lcd display voltage, current, active power, energy at the same time. Note: only display and shunt are included. For breaking connections after they have already been locked together. Contact material: copper, silver plated Flame Class: UL94-V0 or UL94-5VA.

Degree of protection: IP2 * / IP67.


Similar products

---

Absolute USA ANL200-4 4 Pack ANL 200 Amp Gold Plated Fuse

2 mounting holes accept #10 M5 screws. 1000 vdc solar panel wire extension. 12 volts. For breaking connections after they have already been locked together. With overload alarm functionIf active power is larger than threshold, backlight and power will flash. Tin-plated copper studs and nuts. You can waive the signature Confirmation by sending us a message with your request when placing your order.

Absolute anl200-4 4 pack anl fuse 200 amp gold plated operation: on/off, 1250a dc cranking 10 sec, Voltage: 48V DC, rating: 275a dc continuous 1hr, 455a dc intermittent 5 min, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches.

Absolute anl200-4 4 pack anl fuse 200 Amp Gold Plated. Continuous rating: 130A AC/ 150A DC. Store energy data when power offcan be reset to 0 Very handy for the assembly of custom Mc4 wires. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits.

Rated voltage: 1000V DC. Test voltage: 6000V 50Hz, 1min.


Similar products

---

Signstek MC3 MC4 Solar Crimping Tools for 2.5-6.0mm2 Solar Panel PV Cable

2 mounting holes accept #10 M5 screws. Orders of 5 or more batteries shipped on a pallet must be signed for when delivered. Protection degree: ip67, mated unmating Force: 200 Newton Insulation Material: PC/PA. 150a common busbar with 4 studs and a cover. This ensures the switch meets ABYC requirements. Ignition protected.

12 volt 125ah group 31 agm deep Cycle Heavy Duty Battery. Flammability rating: UL94-V0 Very handy for the assembly of custom Mc4 wires. Portable style with perfect handle gripping position, light weight, logical structure and perfect handle shape design. A contact number is required to schedule pallet delivery.

Compatible with mc4 connectors Also known as MC4 T connectors. Voltage test range: dc 6. 5~100v; current test range: 0~100A. Large-screen lcd display voltage, active power, current, energy at the same time. Note: only display and shunt are included. You can waive the signature Confirmation by sending us a message with your request when placing your order.

Made in USA ! Rated voltage: 1000V DC.


Similar products