FireStik K-8 18 feet Single Antenna Coax Cable W/ PL259 TO 2 LUGS

Firestik 18' 5. 5m rg-58a/u fire-flex pl to Lug Firestik 18' 5. 5m rg-58a/u fire-Flex PL to Lug.

ProComm JBC986 Heavy-Duty 3-Inch Ball-Mount with Barrel Spring

2-3/4" from mount surface to ball edge, 3-1/2" mounting plate diameter, 3/4" from inside of mount surface to bolt edge, 4" spring height. Works with any antenna with 3/8" bolt. Attached to the mounting screws are two lug coax connections. Heavy-duty barrel spring for antennas up to 102" Adjustable ball mount Lug style connector Heavy duty ball mount with potbelly spring.

Ball will swivel to allow you to mount the antenna on a vertical, horizontal or angled flat surface and still have the antenna straight up and down.


Similar products

HUSTLER IC56 102" STAINLESS STEEL CB RADIO WHIP ANTENNA WITH WELDED STUD AND STATIC BALL
WORKMAN 102SSWA 102" Inch CB Ham Radio Antenna Stainless Steel Whip
Redman CB 102 Inch CB Ham Radio Antenna Stain Steel Power Whip with Stud mount
FireStik K-8 18 feet Single Antenna Coax Cable W/ PL259 TO 2 LUGS
PYLE PSP8 All Weather 5-Inch Trumpet Speaker
Pro Trucker 102" Inch CB Ham Radio Antenna Stainless Steel Whip
Uniden BEARCAT CB Radio With Sideband And WeatherBand (980SSB)
Cobra 29 LX 40-Channel CB Radio with Instant Access 10 NOAA Weather Stations and Selectable 4 Color Display
ProComm Heavy-Duty Barrel Spring for Antennas (upto 102" whips)
Uniden PRO520XL 40-Channel CB Radio


Firestik SS-3H Heavy Duty Stainless Steel Antenna Spring

Works with any antenna with 3/8" bolt. Ball will swivel to allow you to mount the antenna on a vertical, horizontal or angled flat surface and still have the antenna straight up and down. 2-3/4" from mount surface to ball edge, 3/4" from inside of mount surface to bolt edge, 3-1/2" mounting plate diameter, 4" spring height.

Firestik heavy-Duty Spring Stainless Steel. Attached to the mounting screws are two lug coax connections. Firestik ss3h heavy duty Stainless Steel Springs Heavy duty ball mount with potbelly spring.


Similar products

18' RG-58A/U Coaxial Cable With Pl-259 Connectors
Firestik K-4A Stud with Screw-On Coaxial Termination for Antenna Mirror Mounts
FIRESTIK K-4A CB RADIO ANTENNA HEAVY DUTY SO-239 STUD MOUNT (BULK)
FireStik FL3-B Three Foot FireFly Antenna With Tuneable Tip (Black)
FireStik 5 feet II TUNABLE TIP BLACK
Uniden PRO520XL 40-Channel CB Radio
FireStik SS-204A Adjustable stainless steel vertical door jamb mount
FireStik K-1A Push-n-Twist quick disconnect
SWR METER for CB Radio Antennas with 3' Jumper cable - Workman SWR2T & CX-3-PL-PL


HUSTLER IC56 102" STAINLESS STEEL CB RADIO WHIP ANTENNA WITH WELDED STUD AND STATIC BALL

Fits all 3/8 x 24 threaded mounts. 102" long with 3/8" x 24 thread. No set screws on mounting stud. Mounting stud is pressed so no adjustments can be done, there are no set screws to come loose. 500 watt power rating. Works with any antenna with 3/8" bolt. Excellent for all off-road terrain. Dissipation tip to reduce unwanted static buildup.

2-3/4" from mount surface to ball edge, 3-1/2" mounting plate diameter, 3/4" from inside of mount surface to bolt edge, 4" spring height. Firestik heavy-Duty Spring Stainless Steel. Attached to the mounting screws are two lug coax connections. Frequency range is 26-30mhz. This material is so tough it can be bent 180 degrees and will spring back to its original shape.

17-7 stainless steel. Hustler's ic56 102 inch whip antenna is made from the finest 17-7 ph tapered stainless steel which resists bending and kinking. Ball will swivel to allow you to mount the antenna on a vertical, horizontal or angled flat surface and still have the antenna straight up and down. Heavy duty ball mount with potbelly spring.

.


Similar products

ProComm JBC986 Heavy-Duty 3-Inch Ball-Mount with Barrel Spring
ProComm Heavy-Duty Barrel Spring for Antennas (upto 102" whips)
Hustler / New-Tronics Antenna Corp. No. SSM-3 Stainless Steel CB Antenna Spring with Coupling Stud
18' RG-58A/U Coaxial Cable With Pl-259 Connectors
Firestik SS-3H Heavy Duty Stainless Steel Antenna Spring
Uniden BEARCAT CB Radio With Sideband And WeatherBand (980SSB)
RG-58A/U Coaxial Cable w/Molded PL-259 Connectors (18 feet)
ProComm JBC985-3P Heavy Duty Ball Mount with SO-239 Connection
Hustler SSM1 Ss Professional Ball Mount And Spring
FireStik K-8 18 feet Single Antenna Coax Cable W/ PL259 TO 2 LUGS


Firestik M2 Molded Plastic Side Mount

Firestik side mount Molded Plastic Heavy duty ball mount with potbelly spring. Attached to the mounting screws are two lug coax connections. 500 watt power rating. No set screws on mounting stud. Frequency range is 26-30mhz. Firestik Side Mount Molded Plastic. Ball will swivel to allow you to mount the antenna on a vertical, horizontal or angled flat surface and still have the antenna straight up and down.

Works with any antenna with 3/8" bolt. 102" long with 3/8" x 24 thread. 2-3/4" from mount surface to ball edge, 3-1/2" mounting plate diameter, 3/4" from inside of mount surface to bolt edge, 4" spring height. Firestik heavy-Duty Spring Stainless Steel. 17-7 stainless steel.


Similar products

Firestik SS-3H Heavy Duty Stainless Steel Antenna Spring
FireStik K-8 18 feet Single Antenna Coax Cable W/ PL259 TO 2 LUGS
SWR METER for CB Radio Antennas with 3' Jumper cable - Workman SWR2T & CX-3-PL-PL
Uniden PRO520XL 40-Channel CB Radio
FireStik FL3-B Three Foot FireFly Antenna With Tuneable Tip (Black)
Cobra 75WXST 40-Channel CB Radio
Firestik II FS-2BK 2 feet 300 Watt FS Series Tunable Tip CB Antenna - 1 Each - Black
LOT OF 2 (TWO) Firestik SS-3M Medium Duty Stainless Steel CB Radio Antenna Spring
Firestik K-4A Stud with Screw-On Coaxial Termination for Antenna Mirror Mounts


FireStik K4 Antenna Stud Mounts

No set screws on mounting stud. Ball will swivel to allow you to mount the antenna on a vertical, horizontal or angled flat surface and still have the antenna straight up and down. Works with any antenna with 3/8" bolt. Attached to the mounting screws are two lug coax connections. Utilizes ring terminal connectors.

Frequency range is 26-30mhz. Firestik Side Mount Molded Plastic. 2-3/4" from mount surface to ball edge, 3-1/2" mounting plate diameter, 3/4" from inside of mount surface to bolt edge, 4" spring height. Firestik heavy-Duty Spring Stainless Steel. Made in usa. 500 watt power rating. 102" long with 3/8" x 24 thread.

17-7 stainless steel. K4 stud mount Heavy duty ball mount with potbelly spring.


Similar products

FireStik K-8R18 18 foot Fire-Flex coax cable with Fire-Ring
Firestik SS-3H Heavy Duty Stainless Steel Antenna Spring
FireStik K-8R9 9 foot Fire-Flex coax cable with Fire-Ring
Firestik Antenna FireStik MU8R18 18-Foot Single Antenna Coaxial Cable
FireStik FL3-B Three Foot FireFly Antenna With Tuneable Tip (Black)
FireStik K-1A Push-n-Twist quick disconnect
18' RG-58A/U Coaxial Cable With Pl-259 Connectors
Firestik K-4A Stud with Screw-On Coaxial Termination for Antenna Mirror Mounts
Cobra 75WXST 40-Channel CB Radio


FireStik FL3-B Three Foot FireFly Antenna With Tuneable Tip Black

No set screws on mounting stud. Fl3-b three foot firefly antenna With Tuneable Tip Black Heavy duty ball mount with potbelly spring. 17-7 stainless steel. Frequency range is 26-30mhz. Attached to the mounting screws are two lug coax connections. Flexible fiberglass tube. Easy-tune 'bare-hands tunable tip'. Utilizes ring terminal connectors.

High-performance coil design. Works with any antenna with 3/8" bolt. Made in usa. Lightweight. Firestik Side Mount Molded Plastic. 500 watt power rating. 2-3/4" from mount surface to ball edge, 3-1/2" mounting plate diameter, 3/4" from inside of mount surface to bolt edge, 4" spring height. Firestik heavy-Duty Spring Stainless Steel.

102" long with 3/8" x 24 thread. Ball will swivel to allow you to mount the antenna on a vertical, horizontal or angled flat surface and still have the antenna straight up and down.


Similar products

Firestik SS-3H Heavy Duty Stainless Steel Antenna Spring
18' RG-58A/U Coaxial Cable With Pl-259 Connectors
Firestik K-4A Stud with Screw-On Coaxial Termination for Antenna Mirror Mounts
FIRESTIK K-4A CB RADIO ANTENNA HEAVY DUTY SO-239 STUD MOUNT (BULK)
Cobra 75WXST 40-Channel CB Radio
FireStik K-1A Push-n-Twist quick disconnect
Firestik Fire-flex Cable Assembly W/low-profile Fire-ring and Stud
SWR METER for CB Radio Antennas with 3' Jumper cable - Workman SWR2T & CX-3-PL-PL
Uniden PRO520XL 40-Channel CB Radio
RG-58A/U Coaxial Cable w/Molded PL-259 Connectors (18 feet)


WORKMAN 102SSWA 102" Inch CB Ham Radio Antenna Stainless Steel Whip

Works with any antenna with 3/8" bolt. High-performance coil design. Comes with as1 mounting Stud And Allen Key Heavy duty ball mount with potbelly spring. 17-7 stainless steel. Lightweight. Easy-tune 'bare-hands tunable tip'. 102" long with 3/8" x 24 thread. 2-3/4" from mount surface to ball edge, 3/4" from inside of mount surface to bolt edge, 3-1/2" mounting plate diameter, 4" spring height.

Firestik heavy-Duty Spring Stainless Steel. Utilizes ring terminal connectors. 500 watt power rating. Comes with as1 mounting Stud And Allen Key. Ball will swivel to allow you to mount the antenna on a vertical, horizontal or angled flat surface and still have the antenna straight up and down. Firestik Side Mount Molded Plastic.

Made in usa. Frequency range is 26-30mhz. 102" inch whip antenna 17-7 ph tapered stainless steel. Attached to the mounting screws are two lug coax connections. Swr adjustable.


Similar products

ProComm JBC986 Heavy-Duty 3-Inch Ball-Mount with Barrel Spring
ProComm Heavy-Duty Barrel Spring for Antennas (upto 102" whips)
18' RG-58A/U Coaxial Cable With Pl-259 Connectors
WORKMAN RV1 CB RADIO ANTENNA SINGLE GROOVE MIRROR MOUNT W/ SO239 STUD
Firestik SS-3H Heavy Duty Stainless Steel Antenna Spring
3 Way Aluminum Cb or Ham Antenna Aluminum Mirror Mount with Stud
FireStik SS-204A Adjustable stainless steel vertical door jamb mount
WORKMAN KA-52SS CB RADIO ANTENNA STAINLESS STEEL BARREL SPRING FOR 102" WHIPS
Firestik K-4A Stud with Screw-On Coaxial Termination for Antenna Mirror Mounts
50ft Rg8x Coax UHF (Pl259) Male/male 50 Ohm Antenna Cable


Firestik FS-3BK Black 3' 650W Tunable Tip CB Antenna

The "fs" antennas are 100% American made with 100% American materials. Made in usa. Utilizes ring terminal connectors. 500 watt power rating. Lightweight. Requires fine tuning SWR. 5/8 wave length design, rated at 650 watts. Each is wound with heavy insulated copper wire to prevent the oxidation and shorted windings often found on non-Firestik antennas.

Swr adjustable. No set screws on mounting stud. The tunable tip mechanism is made from rust-proof brass and has a rubber o-ring to hold the adjuster in place after tuning. High-performance coil design. Comes with as1 mounting Stud And Allen Key. 102" long with 3/8" x 24 thread. Fits all 3/8 x 24 threaded mounts. For peek performance we recommend that you use one of our 18-foot Fire-Flex coaxial cables with these antennas.

Easy-tune bare-hands tunable tip, 3/8 inch x 24 threaded base with tapered contact end. Frequency range is 26-30mhz. Each antenna is covered with a static reducing, water-tight sleeve containing UV and pigment stabilizers. Our 3/8"-24 threaded base has a tapered contact point that works especially well with Firestik mounts and accessories.




Similar products

Firestik SS-3H Heavy Duty Stainless Steel Antenna Spring
Firestik K-4A Stud with Screw-On Coaxial Termination for Antenna Mirror Mounts
18' RG-58A/U Coaxial Cable With Pl-259 Connectors
Cobra 75WXST 40-Channel CB Radio
FIRESTIK K-4A CB RADIO ANTENNA HEAVY DUTY SO-239 STUD MOUNT (BULK)
FireStik K-1A Push-n-Twist quick disconnect
Firestik Fire-flex Cable Assembly W/low-profile Fire-ring and Stud
SWR METER for CB Radio Antennas with 3' Jumper cable - Workman SWR2T & CX-3-PL-PL
Uniden PRO520XL 40-Channel CB Radio
Jeep Wrangler 75WXST CB Mount for Passenger Grab Bar JK Models 2011 to Present


FireStik 5 feet II TUNABLE TIP BLACK

Firestik Side Mount Molded Plastic. Swr adjustable. Easy-tune 'bare-hands tunable tip'. Lightweight. No set screws on mounting stud. 102" long with 3/8" x 24 thread. Comes with as1 mounting Stud And Allen Key. 102" inch whip antenna 17-7 ph tapered stainless steel. Works with any antenna with 3/8" bolt. Requires fine tuning SWR.

Easy-tune bare-hands tunable tip, 3/8 inch x 24 threaded base with tapered contact end. Custom blended, glass fiber reinforced shaft, hi-performance loading coil. Made in usa. Fits all 3/8 x 24 threaded mounts. Firestik 5' 152cm firestik ii Heavy-Duty Antenna- 5/8" Wave Black. 2-3/4" from mount surface to ball edge, 3-1/2" mounting plate diameter, 3/4" from inside of mount surface to bolt edge, 4" spring height.

Firestik heavy-Duty Spring Stainless Steel. Attached to the mounting screws are two lug coax connections. Can be used in single or dual configurations. Firestik 5' 152cm firestik ii heavy-duty Antenna- 5/8" Wave Black Heavy duty ball mount with potbelly spring. Frequency range is 26-30mhz.


Similar products

Firestik SS-3H Heavy Duty Stainless Steel Antenna Spring
18' RG-58A/U Coaxial Cable With Pl-259 Connectors
Firestik K-4A Stud with Screw-On Coaxial Termination for Antenna Mirror Mounts
FireStik SS-204A Adjustable stainless steel vertical door jamb mount
FIRESTIK K-4A CB RADIO ANTENNA HEAVY DUTY SO-239 STUD MOUNT (BULK)
SWR METER for CB Radio Antennas with 3' Jumper cable - Workman SWR2T & CX-3-PL-PL
FireStik K-1A Push-n-Twist quick disconnect
Firestik Fire-flex Cable Assembly W/low-profile Fire-ring and Stud
Uniden PRO520XL 40-Channel CB Radio
Cobra 75WXST 40-Channel CB Radio