4 Gauge 4 AWG 20 Feet Red + 20 Feet Black 40 Feet Total Welding Battery Pure Copper Flexible Cable Wire — Car, Inverter, RV, Solar by WindyNation

#ad
WindyNation #ad - Windynation's power-Flex Welding cable is a highly flexible industrial grade electrical cable. Rated up to 600 volts, -50°c to +105°c -58°f to +221°f. Made in the usa. Pure copper cable. 4 awg 4 gauge cable. Complies with saE J1127. Iec and roHS compliant. Please refer to the photo gallery for a technical specification chart amperage, insulation and copper thickness, stranding, voltage, etc.

High grade epdm insulation jacket: Resistant to tears, water moisture, cuts, abrasion, and oil based solvents. High stranding cable count combined with EPDM insulation results in a very flexible cable. Copper cable is fully annealed per ASTM standards. Windynation's welding cable is excellent for welding applications, inverter wiring, battery cable applications, battery bank wiring wind and solar, RV & car wiring applications, and any other application where a highly flexible pure copper conductor is required.

More information about WindyNation #ad

SELTERM 10 Pack 4 Gauge 4 AWG 5/16" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug

#ad
SELTERM #ad - Heavy duty battery cable lugs from SELTERM are manufactured using industry leading manufacturing processes to guarantee a high-quality product. The copper eyelet connectors are rated for up to 600 volts and tested to ANSI/UL 486 standard. Copper tubing used for producing the battery cable lugs meet ASTM B 188 electrical grade standard.

Can be Crimped or Soldered. Furthermore, the copper battery lugs are both UL and CUL listed to ensure optimal performance once installed. Heavy duty construction for Enhanced High Temperature Durability. Ul tested & Approved. Lugs are suitable for use with Welding Cables and Battery Cables. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity.

SELTERM 10 Pack 4 Gauge 4 AWG 5/16" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug #ad - Close end pad seals Out Moisture Keeping Cables Dry. The copper lugs also meet S. A. E conductivity standards and are RoHS compliant.

More information about SELTERM #ad


Similar products



Blue Sea Systems e-Series On/Off Battery Switch

#ad
Acr Electronics 915 #ad - Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Ip66 waterproof, iso 8846 and meets ABYC requirements. Terminal stud size: 3/8" - 16. Switches a single battery to a single load group. Positions: single-circuit On-Off. Ul tested & Approved. E series battery switch, red, Mfg# 9003E, 350A control.

600a int. 48vdc. 3. 85"h x 3. 85"w x 3. 1"d. Can be Crimped or Soldered. Continuous rating: 350A, Maximum voltage: 48V DC. Single circuit on-off. Heavy duty construction for Enhanced High Temperature Durability. Ignition protected-safe for installation aboard gasoline powered boats. Close end pad seals Out Moisture Keeping Cables Dry.

More information about Acr Electronics 915 #ad


Similar products



SELTERM 10 Pack 4 Gauge 4 AWG 5/16" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets

#ad
SELTERM #ad - Ul tested & Approved. Selterm marine grade copper Lugs are manufactured using industry leading processes to guarantee a high-quality product. Close end pad seals Out Moisture Keeping Cables Dry. Can be Crimped or Soldered. Made from 100% annealed Tinned Copper for Max Current Flow. Ignition protected-safe for installation aboard gasoline powered boats.

Single circuit on-off. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Continuous rating: 350A, Maximum voltage: 48V DC. Ul tested & Approved. Heavy duty construction for Enhanced High Temperature Durability. Close end pad seals Out Moisture Keeping Cables Dry. Can be Crimped or Soldered. Ip66 waterproof, iso 8846 and meets ABYC requirements.

SELTERM 10 Pack 4 Gauge 4 AWG 5/16" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets #ad - To ensure corrosion resistance the tin-plated lugs are salt spray tested to ASTM B 117. Terminal stud size: 3/8" - 16. Switches a single battery to a single load group. The battery Cable lugs meet S.

More information about SELTERM #ad


Similar products



Blue Sea Systems MaxiBus 250A BusBar with Six Terminal 18 Studs of 5/16-Inch

#ad
Blue Sea Systems 2126 #ad - 250a maxibus busBar with 6 studs. Can be Crimped or Soldered. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Ignition protected-safe for installation aboard gasoline powered boats. Made from 100% annealed Tinned Copper for Max Current Flow. Can be Crimped or Soldered. Close end pad seals Out Moisture Keeping Cables Dry.

Corrosion free Ideal for Marine Automotive or Outdoor Use. Continuous rating: 250A AC/DC. Single circuit on-off. Ul 94-v0 rated base material resists high heat, tin plated pure electrical copper for maximum conductivity. Continuous rating: 350A, Maximum voltage: 48V DC. Ul tested & Approved. Ip66 waterproof, iso 8846 and meets ABYC requirements.

Blue Sea Systems MaxiBus 250A BusBar with Six Terminal 18 Studs of 5/16-Inch #ad - Bus material - tin platted copper cda 110/uns c1100 insert molded stainless steel studs eliminate need for securing nut and allow high torqueing for excellent electrical contact Raised bus provides easy access to multiple wires on a single stud. Ul tested & Approved. Heavy duty construction for Enhanced High Temperature Durability.

Terminal stud size: 3/8" - 16.

More information about Blue Sea Systems 2126 #ad


Similar products



Blue Sea Systems 250A MRBF Terminal Fuse

#ad
Blue Sea Systems 5189 #ad - Max voltage: 300v aC/ 48V DC. Continuous rating: 350A, Maximum voltage: 48V DC. Ip66 waterproof, iso 8846 and meets ABYC requirements. Ul tested & Approved. Continuous rating: 250A AC/DC. Ul 94-v0 rated base material resists high heat, tin plated pure electrical copper for maximum conductivity. Single circuit on-off.

10, 000 aic at 14v dc satisfies abyc requirements for dc main circuit protection on large battery banks Requires the use of Terminal Fuse Blocks PN 5191 or PN 2151-do not mount the fuse directly to the battery terminal 1, 000A Interrupt Capacity. Requires the use of terminal fuse blocks PN 5191 or PN 2151-do not mount the fuse directly to the battery terminal.

Blue Sea Systems 250A MRBF Terminal Fuse #ad - Ignition protected-safe for installation aboard gasoline powered boats. Switches a single battery to a single load group. 10, 000 aic at 14v dc satisfies abyc requirements for DC Main circuit protection on large battery banks. Visible indication of blown condition. Ul tested & Approved. Corrosion free Ideal for Marine Automotive or Outdoor Use.

250a maxibus busBar with 6 studs. Close end pad seals Out Moisture Keeping Cables Dry.

More information about Blue Sea Systems 5189 #ad


Similar products



Young4us 2 Pack 3/4'' Heat Shrink Tube 3:1 Adhesive-Lined Heat Shrinkable Tubing Black&RED 4Ft

#ad
Young4us 43237-2 #ad - Max voltage: 300v aC/ 48V DC. Terminal stud size: 3/8" - 16. Ul tested & Approved. Can be Crimped or Soldered. Pack of 1, 250a terminal fuse, Max voltage: 58V DC. 2 mounting holes accept #10 M5 screws. Heavy duty construction for Enhanced High Temperature Durability. These tubes are suitable for bundling, electrical insulation, mechanical protection and wire joints etc.

Ul 94-v0 rated base material resists high heat, tin plated pure electrical copper for maximum conductivity. Made from 100% annealed Tinned Copper for Max Current Flow. Continuous rating: 350A, Maximum voltage: 48V DC. Corrosion free Ideal for Marine Automotive or Outdoor Use. Visible indication of blown condition.

Young4us 2 Pack 3/4'' Heat Shrink Tube 3:1 Adhesive-Lined Heat Shrinkable Tubing Black&RED 4Ft #ad - Ip66 - protected against powerful water jets. Temperature range: -55c to +125c, beginning shrinking temperature: 70C, Completely shrinking temperature: 125C. Main color: black & red. Requires the use of terminal fuse blocks PN 5191 or PN 2151-do not mount the fuse directly to the battery terminal. Close end pad seals Out Moisture Keeping Cables Dry.

Ignition protected-safe for installation aboard gasoline powered boats.

More information about Young4us 43237-2 #ad


Similar products



Blue Sea Systems 5191 Fuse Block Terminal 30-300 AMP

#ad
Acr Electronics 5191 #ad - Max voltage: 300v aC/ 48V DC. Main color: black & red. Insulating cap prevents accidental shorts. Ignition protected-safe for installation aboard gasoline powered boats. Fuses sold separately. Close end pad seals Out Moisture Keeping Cables Dry. Ip66 waterproof, iso 8846 and meets ABYC requirements. Material: polyolefin.

Blue Sea Systems 5191 Fuse Block Terminal 30-300 AMP #ad - 2 mounting holes accept #10 M5 screws. Continuous rating: 350A, Maximum voltage: 48V DC. Ip66 - protected against powerful water jets. Can be Crimped or Soldered. Rated voltage: 600V. Ignition protected when used with MRBF fuses. Ul tested & Approved. 10, 000 aic at 14v dc satisfies abyc requirements for DC Main circuit protection on large battery banks.

Can be Crimped or Soldered. Ignition protected-safe for installation aboard gasoline powered boats. Close end pad seals Out Moisture Keeping Cables Dry. Ul 94-v0 rated base material resists high heat, tin plated pure electrical copper for maximum conductivity.

More information about Acr Electronics 5191 #ad


Similar products



Blue Sea Systems m-Series Mini On-Off Battery Switch with Knob- Red

#ad
Acr Electronics 6006 #ad - Max voltage: 300v aC/ 48V DC. Ip66 waterproof, iso 8846 and meets ABYC requirements. Temperature range: -55c to +125c, beginning shrinking temperature: 70C, Completely shrinking temperature: 125C. Fuses sold separately. Switches a single battery to a single load group. Ignition protected when used with MRBF fuses.

Blue Sea Systems m-Series Mini On-Off Battery Switch with Knob- Red #ad - Make before break contact design allows switching between battery banks without power interruption. Ul tested & Approved. 2 mounting holes accept #10 M5 screws. Rated voltage: 600V. Main color: black & red. Shrink ratio: 3:1, round diameter: 3/4'', Length: 1. 22m4ft. Ip66 waterproof, iso 8846 and meets ABYC requirements.

Ul tested & Approved. Close end pad seals Out Moisture Keeping Cables Dry. 2. 83"w x 2. 83"h x 3. 1"d. Ignition protected-safe for installation aboard gasoline powered boats.

More information about Acr Electronics 6006 #ad


Similar products



Blue Sea Systems 70A AMI/MIDI Fuse

#ad
Blue Sea Systems 5254 #ad - Compact fuses for main or branch circuit protection Standard circuit protection device for automobiles and trucks Tin-plated connector blades for corrosion resistance. Temperature range: -55c to +125c, beginning shrinking temperature: 70C, Completely shrinking temperature: 125C. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity.

Blue Sea Systems 70A AMI/MIDI Fuse #ad - Max voltage: 300v aC/ 48V DC. Single circuit on-off. Made from 100% annealed Tinned Copper for Max Current Flow. Ul 94-v0 rated base material resists high heat, tin plated pure electrical copper for maximum conductivity. Single circuit on-off. Make before break contact design allows switching between battery banks without power interruption.

Main color: black & red. Ul tested & Approved. Shrink ratio: 3:1, round diameter: 3/4'', Length: 1. 22m4ft. Ignition protected when used with MRBF fuses. Switches a single battery to a single load group. 250a maxibus busBar with 6 studs.

More information about Blue Sea Systems 5254 #ad


Similar products



Blue Sea Systems ST Blade Fuse Block - 12 Circuits with Negative Bus & Cover

#ad
Blue Sea Systems 5026 #ad - Ul tested & Approved. Ignition protected-safe for installation aboard gasoline powered boats. Tin-plated connector blades for corrosion resistance. Fuses sold separately. Insulating cap prevents accidental shorts. Close end pad seals Out Moisture Keeping Cables Dry. 3. 32"w x 6. 5"h x 1. 52"d. Material: polyolefin. Fast-acting type fuses ideal for electronic devices.

Main color: black & red. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Continuous rating: 300A, Maximum Voltage: 48V DC. Switches a single battery to a single load group. Single circuit on-off. Pack of 1, 250a terminal fuse, Max voltage: 58V DC. Ignition protected when used with MRBF fuses.

Blue Sea Systems ST Blade Fuse Block - 12 Circuits with Negative Bus & Cover #ad - Can be Crimped or Soldered. Max voltage: 300v aC/ 48V DC. Rated voltage: 600V. Continuous rating: 350A, Maximum voltage: 48V DC.

More information about Blue Sea Systems 5026 #ad


Similar products