1 Foot HD-SDI 3G RG6 BNC to BNC Video Coaxial Cable 75 Ohm RED 4.5Ghz Made in the USA by Custom Cable Connection

#ad
Custom Cable Connection 108301-1RED #ad - Keep your sdi panels color coded with red clark wire cd7506 rg6 hd sdi cable is made in the USA and looks fantasticSupports SMPTE 259M/292M/424M Standards. These cables feature dual copper braided shield for high flexibility, strength, and superb shielding against interference. Lifetime Limited Warranty. Clark wire cd7506 rg6 cable is made in the usasupports smpte 259m/292m/424m standards connector a: true 75 ohm bnc male connector b: true 75 ohm bnc male number of coax: 1 rg type: 6/u awG: 18 Stranding: Solid Conductor Material: BC - Bare Copper Insulation Material: Gas-injected FHDPE - Foam High Density Polyethylene Outer Shield Material Trade Name: Duofoil® Red rg6 hd-sdi cables from custom cable connection are designed for professional broadcast applications in mind.

This cable is 100% sweep tested and is ready to meet today's requirements of 3 Gbps data transfer. The rg6 hd-sdi cables are designed for professional broadcast applications in mind. The center conductor is made from true 75 Ohm 18AWG solid copper. Connector a: true 75 ohm male bnc rated 3ghz Connector B: True 75 Ohm Male BNC Rated 3Ghz.

1 Foot HD-SDI 3G RG6 BNC to BNC Video Coaxial Cable 75 Ohm RED 4.5Ghz Made in the USA by Custom Cable Connection #ad - The center conductor is made from true 75 Ohm 18AWG solid copper. These cables feature dual copper braided shield for high flexibility, strength, and superb shielding against interference. Made by custom cable Connection in Dallas, TX USA.

More information about Custom Cable Connection 108301-1RED #ad

Blackmagic Design Micro Converter SDI to HDMI with Power Supply BMD-CONVCMIC/SH/WPSU

#ad
Black Magic CONVCMIC/SH #ad - Blackmagic convcmicsh micro converter sdi-hdmi sd/hd/3g-sdi input. Automatic Input Signal Detection. Hdmi and sdi Loop Outputs. Supports sD and HD Signals. Software Control.

More information about Black Magic CONVCMIC/SH #ad


Similar products



Decimator MD-HX HDMI and SDI Cross Converter with Scaling & Frame Rate Conversion

#ad
Decimator DD-HX #ad - Audio pairs in the sDI and HDMI outputs can be rearranged as required. Supports sD and HD Signals. Support both 3g level A and B on the input and output. Horizontal and/or Vertical image flipping via the built in scaler. Automatic Input Signal Detection. Output pair 1 can either be a copy of the sdi input default or the same as pair 2|Audio pairs in the SDI and HDMI outputs can be rearranged as required Sd/hd/3g-sdi input.

Hdmi and sdi Loop Outputs. Output pair 1 can either be a copy of the SDI input default or the same as pair 2. Sdi to hdmi, down up cross converter, HDMI to SDI, etc. Robust aluminum case with easy to use LCD and button control system. 4 x 3g/hd/sd-sdi outputs, that allow it to be used as a 1 to 4 distribution amplifier.

Decimator MD-HX HDMI and SDI Cross Converter with Scaling & Frame Rate Conversion #ad - Decimator md-hx hdmi & sdi cross converter with scaling & frame rate conversion - Power Supply - HDMI Cable - USB Cable - Decimator 3 Year Limited Warranty|Combines several converters for the price of one e. G. Software Control. Robust aluminum case with easy to use LCD and button control system. 4 x 3g/hd/sd-sdi outputs, that allow it to be used as a 1 to 4 distribution amplifier.

More information about Decimator DD-HX #ad


Similar products



50 foot Black BJC 3G/6G HD SDI cable Belden 1694A, BNC to BNC

#ad
Blue Jeans Cable BJC6SDI50B #ad - Coax is stripped with precise dimensional control in our Swiss-made Schleuniger coaxial cable strippers, resulting in a shield braid undamaged by stripping and a center conductor of consistent maximum length for full engagement in the BNC pin crimp. Dense two-layered foil and 95% tinned copper braid shield provide high shield performance.

Rated cmr for installation in walls and risers. Output pair 1 can either be a copy of the SDI input default or the same as pair 2. Hdmi and sdi Loop Outputs. Bnc to bnc 3g/6g hd sdi cable, black, 50 foot, blue jeans cable brand This HD-SDI cable is built with precision video coax which has been sweep-tested to 4.

50 foot Black BJC 3G/6G HD SDI cable Belden 1694A, BNC to BNC #ad - 5 ghz and high-quality 75 ohm crimp-type BNCs. Solid bare 18 awg etp Electrolytic Tough Pitch copper center conductor. The cable stock is made in the USA to exacting standards; every spool is sweep-tested to 4. 5 ghz to ensure that dimensional control and impedance stability are within tight tolerances, and that return loss is kept to a minimum.

Robust aluminum case with easy to use LCD and button control system. 4 x 3g/hd/sd-sdi outputs, that allow it to be used as a 1 to 4 distribution amplifier. Support both 3g level A and B on the input and output. Horizontal and/or Vertical image flipping via the built in scaler.

More information about Blue Jeans Cable BJC6SDI50B #ad


Similar products



Blackmagic Design Micro Converter HDMI to SDI with Power Supply BMD-CONVCMIC/HS/WPSU

#ad
Black Magic CONVCMIC/HS #ad - Solid bare 18 awg etp Electrolytic Tough Pitch copper center conductor. Coaxial cable specifically manufactured for the exacting high-bandwidth requirements of 3G/6G and HD SDI. Rated cmr for installation in walls and risers. Supports sD and HD Signals. Hdmi and sdi Loop Outputs. Support both 3g level A and B on the input and output.

Horizontal and/or Vertical image flipping via the built in scaler. Hdmi input. Software Control. Blackmagic convcmichs micro converter hdmi-sdi sd/hd/3g-sdi input. Output pair 1 can either be a copy of the SDI input default or the same as pair 2. Automatic Input Signal Detection. 2 x sdi Outputs. Software Control. Cable stock 100% sweep-tested to 4.

Blackmagic Design Micro Converter HDMI to SDI with Power Supply BMD-CONVCMIC/HS/WPSU #ad - 5 ghz to ensure full 3G/6G SDI performance. Audio pairs in the sDI and HDMI outputs can be rearranged as required. Automatic Input Signal Detection. Supports sD and HD Signals.

More information about Black Magic CONVCMIC/HS #ad


Similar products



SmallRig 15mm Carbon Fiber Rod for Camera Shoulder Rig, 20cm 8 inch, Pack of 2-870

#ad
SMALLRIG 870 #ad - Rated cmr for installation in walls and risers. Coaxial cable specifically manufactured for the exacting high-bandwidth requirements of 3G/6G and HD SDI. Dense two-layered foil and 95% tinned copper braid shield provide high shield performance. Support both 3g level A and B on the input and output. Horizontal and/or Vertical image flipping via the built in scaler.

Net weight: 40g2pcs materials: Carbon Fiber Sd/hd/3g-sdi input. Software Control. Software Control. Hdmi and sdi Loop Outputs. Cable stock 100% sweep-tested to 4. 5 ghz to ensure full 3G/6G SDI performance. Supports sD and HD Signals. Supports sD and HD Signals. The carbon fiber rods are much lighter than stainless steel rods, but carbon fiber rods are incredibly rigid and durable.

SmallRig 15mm Carbon Fiber Rod for Camera Shoulder Rig, 20cm 8 inch, Pack of 2-870 #ad - Output pair 1 can either be a copy of the SDI input default or the same as pair 2. 2 x sdi Outputs. Robust aluminum case with easy to use LCD and button control system. 4 x 3g/hd/sd-sdi outputs, that allow it to be used as a 1 to 4 distribution amplifier.

More information about SMALLRIG 870 #ad


Similar products



BJC 3G/HD SDI Cable, made with Canare L-4CFB Cable and Canare BNCs, 3 foot

#ad
Blue Jeans Cable L4SDI3 #ad - The bnc connectors are specifically sized to fit this cable, for excellent mechanical and electrical stability. Blue jeans cable: professional cable AssemblyBlue Jeans Cable is an audio, video and data cable assembly shop in Seattle, Washington. 2 x sdi Outputs. Dense two-layered foil and 95% tinned copper braid shield provide high shield performance.

Supports sD and HD Signals. Compact dimensions rg-59 size, similar to Belden 1505A for low weight and good flexibility. Hdmi and sdi Loop Outputs. Rated cmr for installation in walls and risers. Automatic Input Signal Detection. Audio pairs in the sDI and HDMI outputs can be rearranged as required. Blue jeans cable sdi cable, made from canare l-4cfb, 3 footthis sDI cable assembly is made using Canare L-4CFB cable and Canare's BCP-B4F BNC connectors.

BJC 3G/HD SDI Cable, made with Canare L-4CFB Cable and Canare BNCs, 3 foot #ad - L-4cfb is an rg-59 sized cable, similar to Belden 1505A, designed specifically for use in SDI. Three-piece 75 ohm crimp-assembly BNCs provide consistent impedance right through the plug, for the best return loss performance. Robust aluminum case with easy to use LCD and button control system. 4 x 3g/hd/sd-sdi outputs, that allow it to be used as a 1 to 4 distribution amplifier.

More information about Blue Jeans Cable L4SDI3 #ad


Similar products



Blackmagic Design HyperDeck Studio Mini Ultra HD Broadcast Deck

#ad
Blackmagic Design HYPERD/STM #ad - It is the new version of carbon fiber rod with the more smooth surface. It fits 15mm rod clamp but its surface is not shiny any more because we have redesigned it based on some customers' advice. The carbon fiber rods are much lighter than stainless steel rods, but carbon fiber rods are incredibly rigid and durable.

Standard 15mm, matte box, follow focus, can be used with 15mm rod clamp, and so on. Net weight: 40g2pcs; materials: Carbon Fiber; Package include: 2 x carbon fiber rod. Made with canare l-4cfb sDI cable and Canare crimp BNC connectors. Two sd card slots for continuous recording to regular SD cards or UHS-II cards.

Blackmagic Design HyperDeck Studio Mini Ultra HD Broadcast Deck #ad - Lcd for monitoring, status information and menu settings. Output pair 1 can either be a copy of the SDI input default or the same as pair 2. 12 month limited Manufacturer's Warranty. The blackmagic design hyperdeck Studio Mini is a portable broadcast quality deck that records ProRes onto commonly available SD cards.

Automatic Input Signal Detection. Coaxial cable specifically manufactured for the exacting high-bandwidth requirements of 3G/6G and HD SDI. Robust aluminum case with easy to use LCD and button control system. 4 x 3g/hd/sd-sdi outputs, that allow it to be used as a 1 to 4 distribution amplifier.

More information about Blackmagic Design HYPERD/STM #ad


Similar products



Rode VXLR Adapter for VideoMic Mini-Jack Female to XLR Male

#ad
Rode VXLR #ad - Dense two-layered foil and 95% tinned copper braid shield provide high shield performance. Supports sD and HD Signals. Hdmi and sdi Loop Outputs. Solid bare 18 awg etp Electrolytic Tough Pitch copper center conductor. Software Control. Automatic Input Signal Detection. Automatic Input Signal Detection. Sd/hd/3g-sdi input.

Lcd for monitoring, status information and menu settings. Used to convert a 3. 5 mm minijack to a 3 pin XLR. At the other end, the rode vxlr adapter's male XLR connector plugs into your mic pre, mixer, field recorder, or other professional sound equipment. Support both 3g level A and B on the input and output.

Rode VXLR Adapter for VideoMic Mini-Jack Female to XLR Male #ad - Horizontal and/or Vertical image flipping via the built in scaler. Output pair 1 can either be a copy of the SDI input default or the same as pair 2. It is the new version of carbon fiber rod with the more smooth surface. It fits 15mm rod clamp but its surface is not shiny any more because we have redesigned it based on some customers' advice.

The carbon fiber rods are much lighter than stainless steel rods, but carbon fiber rods are incredibly rigid and durable. Standard 15mm, follow focus, can be used with 15mm rod clamp, matte box, and so on.

More information about Rode VXLR #ad


Similar products



5 foot Red BJC High-flex 3G/6G HD SDI patch cable Belden 1505F, BNC to BNC

#ad
Blue Jeans Cable BJCSDI5RF #ad - The cable is rated cm, making it lawful for installation in walls and cable trays--anywhere but in a riser or plenum. Available in multiple jacket colors for ease of cable identification; search our listings for more. Software Control. 12 month limited Manufacturer's Warranty. Support both 3g level A and B on the input and output.

Horizontal and/or Vertical image flipping via the built in scaler. It is the new version of carbon fiber rod with the more smooth surface. It fits 15mm rod clamp but its surface is not shiny any more because we have redesigned it based on some customers' advice. The carbon fiber rods are much lighter than stainless steel rods, but carbon fiber rods are incredibly rigid and durable.

5 foot Red BJC High-flex 3G/6G HD SDI patch cable Belden 1505F, BNC to BNC #ad - Standard 15mm, follow focus, matte box, can be used with 15mm rod clamp, and so on. Net weight: 40g2pcs; materials: Carbon Fiber; Package include: 2 x carbon fiber rod. Made with canare l-4cfb sDI cable and Canare crimp BNC connectors. The bncs, likewise, are true broadcast-quality products designed to minimize return loss through the plug body and plug/jack interface.

Used to convert a 3. 5 mm minijack to a 3 pin XLR. High-flex cable stock designed specifically for 3G/6G SDI and HD SDI patchcord applications; high flexibility coupled with tight impedance stability.

More information about Blue Jeans Cable BJCSDI5RF #ad


Similar products